Mechanical Drawings
MA0 - Top Assembly Drawing
MIF - Interface Drawing List
- MIF-001-B Asm DashboardVCU
- MIF-002-B Asm AuxiliaryBattery
- MIF-003-B Asm MainBatteryIF
- MIF-004-C PowerTrain RelayBox
- MIF-005-A AsmRearFork+Chassis
- MIF-006 MaxVol Battery
MM - Mechanical Manufacturing Drawing List
- Vehicule Frame Mechanical Drawing List
- Carrosserie - Sandwich Panel Body
- Main Battery
- Axle Frame Fork
- Rear Fork
- Rear Wheel
- Steering
- Front Suspension
- Front Wheel
- Antiroll Bar
- Seat
Miscelaneous parts
- MM-003-A FrameBottom Motor
- MM-004-A FrameBottom Seat
- MM-050-C Frame RearSusp Shaft Bushing
- MM-054-B MotorBracket Base
- MM-054.1-B MotorBracket Flange
- MM-074-0 1.1.1 Tôle base 2
- MM-084-A Auxiliary Battery Base
Drawings Identification and Organization
The mechanical drawings are identified by a unique naming convention as follows:
Drawing Identification Convention
TYPE-NUMBER-ISSUE_NAME
Example: MA0-0001-A_Asm eVectors
with
- TYPE a unique code identifying the type of file as defined in the following table
| Code | Meaning |
|---|---|
| MIF | Mechanical Interface Drawing |
| MA0, MA1, MA2, etc... | Mechanical Assembly Drawing of level 0 (top), 1, 2, etc... |
| MM | Mechanical Manufacturing Drawing |
- NUMBER a number
- ISSUE a letter starting with A (first issue) identifying the current issue of the drawing
- NAME a name of the drawing for easy identification
Warning
An underscore _ shall be used between ISSUE and NAME:
Example: MA0-0001-A_Asm eVectors
This is used by SolidWork Marco to automatically link drawing to parts.
The drawings are listed by category in the following section.
Bill of Materials (BOM)
The Bill of Materials (BOM) is also available on the Bill of Material (BOM) page.